CASTROL CLS GREASE
Castrol CLS is a semi-fluid, extreme pressure grease developed using an optimised combination of synthetic base oil, lithium thickener technology and a specially selected additive system incorporating EP/Anti-wear additives, anti-oxidants and corrosion inhibitors.
Castrol CLS is a high quality semi-fluid EP grease with excellent low temperature properties that make it particularly suitable for use in the central lubricating systems of commercial vehicles and is approved according to:
-MAN 283 Li-P 00/000
-Mercedes Benz 264.0
Castrol CLS is also considered an excellent mutipurpose semi-fluid grease for Industrial and Automotive applications generally where a combination of excellent extreme pressure performance and corrosion resistance are core requirements.
-Good mechanical stability enables extended service operation.
-Excellent extreme pressure performance offering enhanced component protection.
-Excellent corrosion protection provides extended service in more exposed operational environments.
-Superior cold flow properties enable year-round use.
Download Product Data Sheet HereSKU: CAS-IND-0033
CASTROL LONGTIME PD 00
Castrol Longtime™ PD range are lithium based greases containing highly refined mineral oils and fortified with the Microflux Trans (MFT) additive system. The MFT additive technology provides optimum wear protection and an extremely low coefficient of friction even under extremes of pressure, vibration, shock loads, at high or low speeds or varying microsmoothing of the friction surfaces. Under severe load, components of the MFT additive combination are activated and diffuse into the surfaces initiating an improvement of their friction characteristics through plastic deformation. The organic reaction products become a component of the tribopolymer system. Unlike the case with conventional lubricants, the tribopolymers formed by MFT are long-chained compounds with excellent lubricity and adhesion. The load carrying area is improved, a hydrodynamic lubrication film is easier to maintain. This unique physio-chemical reaction achieves a nonsacrificial micro-smoothing of the friction surfaces.
Longtime PD can be used for long term or lifetime lubrication even under the most difficult operating conditions such as extreme pressure, vibrations, shock loads and a wide temperature range in highly loaded rolling and sliding bearings.
They can also be used in bearings of spinning and grinding spindles, for gear motors exposed to shock loads, in screening/wood shaping machines and for bearing surfaces of printing plates. These greases are also suitable for bearings with a rotating outer ring and undergoing high stresses due to centrifugal load, e.g. in spreader rolls, roll neck bearings in steel mills, and for bearings with changing rotational directions or slewing movements. They are also used in curved teeth couplings and centralised lubricating systems. Longtime PD 0 and PD 00 can be used as a semi-fluid grease lubricant in gears such as flange, drum-type and worm gears. It is also suitable for use in gears without oil-tight enclosures, gear wheels and rolling bearings with a grease reservoir.
-High load bearing capacity – extends the operating period under high loads leading to optimum wear protection.
-Superior lubrication and surface smoothing effects due to MFT reduced failures leading to less downtime and repair work. MFT can result in prolonging the life of damaged components/bearings.
-Establishment of a protective layer of MFT – this additive system can effectively increase the load bearing area, thus reducing unit pressures, operating temperatures and wear, increasing service life of both parts and lubricant.
-Improved bearing surfaces for longer service life result from the ‘running in’ effect of MFT.
-Extremely low coefficients of friction – generating energy savings and reduced noise levels.
-Multi-functional – Longtime PD 0 and PD 00 are highly recommended for anti-friction bearings with grease reservoir and for leaky gearboxes.
-Easily pumpable in central lubrication systems – does not channel on gears running at high speeds when using PD 0 and PD 00.
-Exceptional water resistance – coating film stays on the surface even in presence of water; even when exposed to the action of hot and chemically active process water.
Download Product Data Sheet HereSKU: CAS-IND-0044
CASTROL MOLUB-ALLOY OG 936 SF NG
CASTROL MOLUB-ALLOY™OG 936 SF NG (previously named Molub-Alloy 936 SF NG) is a uniquely compounded open gear lubricant developed specifically for use on heavy duty mining equipment. It is compounded to give maximum protection to gears and slides on draglines and shovels minimising potential pollution to the environment. Formulated to address environmental concerns, CASTROL MOLUB- ALLOY™ OG 936 SF NG is free of lead, antimony, barium and chlorinated solvents. No solvents of any kind are used.
A highly refined, viscous, paraffinic petroleum derivative is the foundation of a blended base fluid with excellent natural chemical and thermal stability. CASTROL MOLUB-ALLOY™ OG 936 SF NG is compounded to flow readily in the film-forming process, yet it resists “squeeze-out” and clings tenaciously to gear teeth even in vertical position.
A proprietary blend of CASTROL MOLUB-ALLOY™ lubricating solids is included to promote antiwear and load carrying properties beyond those of conventional lubricants. The selected lubricating solids work synergistically with chemical antiwear and EP additives, to reduce friction.
Rust and oxidation inhibitors are included in the formulation to protect the equipment and the lubricating film against the elements in severe climates.
Mining applications include all types of open gears, rails and rollers, racks and pinions, dipper sticks, saddle blocks and other slides on draglines and shovels.
-CASTROL MOLUB-ALLOY™ OG 936 SF NG is free of solvents and materials considered to be hazardous to the environment.
-CASTROL MOLUB-ALLOY™ OG 936 SF NG forms a tough, durable lubricating film with a “cushioning” effect, even under extreme pressure and at low speeds. The film resists erosion from rain or sleet and resists peeling in dusty environments.
Download Product Data Sheet HereSKU: CAS-IND-0047
CASTROL OPTILEB GR UF 1
Castrol Optileb™ GR UF Range (Previously called Obeen™ UF ) – are light, natural-colored special greases. They are physiologically safe and contain only components which are NSF H1 registered and comply with the U.S. Code of Federal Regulations, Title 21, Section 178.3570 and 178.3620 by the Food and Drug Administration (USA) as lubricants where incidental food contact may occur.The range of products under Optileb GR range are Kosher and Halal approved.Application Optileb GR UF is especially suited for the use in the food and beverage industries as well as in the pharmaceutical industry where there may be exposure of the lubricated part to the edible product or its packaging.
Optileb GR UF 00 for grease-lubricated gears and gear motors – central lubrication systems such as in filling plants, packaging stations and cardboard folding machines.
Optileb GR UF 1 as tap, sealing and bearing grease, for long term lubrication of rolling and sliding bearings, for fillers, bottle washing machines, labelling machines, closing machines, filling machines, conches, cyclones.
- -Physiologically safe.
- -Odorless and tasteless
- -Resistant to hot and cold water.
- -Excellent conveying ability.
- -Good anti-corrosion properties.
- -Resists water wash out.
Download Product Data Sheet HereSKU: CAS-IND-0050
CASTROL SPHEEROL SX 2
Spheerol SX 2 is a complex calcium sulphonate grease providing superior performance benefits in the highly aggressive conditions experienced in the marine environment.
Spheerol SX 2 is a true multipurpose ship machinery lubricant, specifically developed to provide enhanced lubrication and protection for bearings, wire ropes and open gears usually found in marine environments.
Spheerol SX 2 is suitable for most journal bearings, wire ropes and open gears used in marine deck equipment and can be considered for roller, ball and needle bearings generally used in engine room equipment.
In addition to the excellent protection provided for wire ropes and open gears, Spheerol SX 2 is also suitable for use on a wide range of deck equipment where it will protect and lubricate hinges, turnbuckles, screws, fair leads etc.
For multipurpose applications a grease gun may be used with Spheerol SX 2. Alternatively traditional application methods can be used for wire ropes and open gears. (Please see also “”Additional Information””).
Features / Benefits
Spheerol SX 2 is proven to offer:
-High drop point.
-Excellent protection against corrosion.
-High resistance to sea water wash off.
-Strong adhesion to surfaces.
-A lubricant which is solvent free containing no heavy metals or harmful constituents.SKU: CAS-IND-0057
CASTROL TRIBOL GR HT 2
Castrol Tribol™ GR HT 2 (previously called Optitemp™ HT 2) is high performance grease for long-term lubrication of rolling and sliding bearings at high operating temperatures as well as at normal or medium bearing pressures. Tribol GR HT 2 is light-colored.
For thermally loaded rolling and sliding bearings such as fan bearings in the textile, wood, plastics and food industries as well as in stove furnaces of the automotive industry For steam-heated calender or drying cylinder bearings As sealing grease for labyrinth seals at high temperatures For the application in slightly acidic or alkaline atmospheres
-Optimum wear protection in the high load range
-Extremely good load bearing capacity
-Aging and temperature-resistant
-Resistant to cold and hot water, limited resistance to alkalis and acids
-Excellent corrosion protection
-Pumpable in central lubrication systems
-Temperature application range: – 20°C/- 4°F to + 160°C/+ 320°F. In case of life-lubricated bearings the temperature of + 150°C/+ 302°F under normal conditions should not be exceeded. Short-term operation at higher temperatures is possible – please consult our Technical Service.
Download Product Data Sheet HereSKU: CAS-IND-0058