-
Showing 1–12 of 156 results
-
-
CASTROL 2T
Castrol 2T is a modern, mineral based 2-stroke oil designed to give good all round performance in most 2-stroke motorcycles and other small engine applications. It’s low ash formula will help to protect against pre-ignition and provide good engine lubrication and cleanliness to maintain good compression and reliable engine startability throughout its life.
Application
Castrol 2T is suitable for use in most 2-stroke motorcycle and scooter engines which require good quality mineral engine oil. It is designed for both oil injection and pre-mix lubrication, as per manufacturers’ instructions, up to a fuel/oil ratio of 50:1.
SKU: CAS-AUT-0001 -
-
CASTROL ACTEVO 4T 10W-40
Castrol Actevo 4T 10W-40 is a latest generation, part-synthetic engine oil developed specifically for 4-stroke motorcycle engines. It is uniquely formulated with Active Protection Molecules (APM), which provide a continuous layer of protection, ensuring up to 70% wear reduction when compared to a JASO MA-2 motorcycle oil, tested in a standard ASTM wear test.
Castrol Actevo 4T 10W-40 is uniquely formulated with Trizone Technology™ – Trizone testing uses Castrol’s own engine test methods to prove performance in the engine (good detergency and durability), reduced clutch slip and reduced gear pitting.
Castrol Actevo 4T 10W-40 has been tested over the equivalent of 600,000 km to ensure outstanding protection for motorcycles and scooters.
Application
Castrol Actevo 4T 10W-40 is suitable for four-stroke motorcycle engines where API SJ and JASO MA2 specifications are recommended.
Advantages
- Outstanding protection for four-stroke motorcycle engines.
- Protects from the start to the end of every journey.
- 70% greater wear protection, compared with a JASO MA2 oil, tested in a standard ASTM wear test.
- Active Protection Molecules (APM) cling to critical engine components.
- Actevo 4T is specially designed with Trizone Technology™.
- Continuous protection at all operating temperatures.
- Actevo 4T produces no rust in salt water corrosion tests
SKU: CAS-AUT-0024 -
-
CASTROL AGRI TRANS PLUS 80W
Agri Trans Plus 80W can be used in hydraulic, transmission and PTO of tractors and off-highway equipment. It gives highest levels of wear prevention from start up and throughout the operative period with enhanced corrosion protection properties.
Advantages
- -Excellent wet clutch and wet brake performance
- -One oil reduces inventory, simplifies servicing, avoids misapplication and saves money
- -Longer component life reduces downtime and maintenance costs
- -Maintains operating temperature and smoother gear changing
- -Excellent oxidation stability and anti corrosion properties
SKU: CAS-AUT-0002 -
-
CASTROL AIRCOL LPT 68
The Castrol Aircol™ LPT Range (previously called Energol™ LPT) are refrigeration compressor lubricants formulated from highly refined naphthenic base oils for use in both large and industrial and small domestic refrigeration units.
Application
The Aircol LPT range is formulated to function as lubricants and coolants, as well as sealants in refrigerating compressors.
They maintain good lubrication properties at the high temperatures reached during the compression phase and good fluidity at the low temperatures within the evaporators. Excellent lubrication of the moving parts in the compressor as well as recycling of the oil, entrained into the system by the refrigerant, are therefore ensured.
The chemical stability of the Aircol LPT oils prevents them from reacting with the refrigerants used in refrigeration systems to form potentially disruptive breakdown products. All Aircol LPT grades are suitable for use in systems using Ammonia (NH3) or halogenated hydrocarbons. They can also be used where good low temperature flow properties are required in the lubricant.
Advantages
-The Aircol LPT Range oils ensure long and trouble-free operation of refrigeration systems through a combination of:
-High thermal and chemical stability.
-Good temperature / viscosity behaviour.
-Good low temperature flow properties.
Download Product Data Sheet Here
SKU: CAS-IND-0015 -
-
CASTROL AIRCOL PD 100
Description
Castrol Aircol™ PD oils are a range of compressor lubricants, based upon highly refined mineral oils, which are intended
for the lubrication of both reciprocating and rotary air compressors.
Application
Aircol PD grades are ashless oils recommended for the lubrication of rotors, bearings and gears in rotary compressors,
especially the oil flooded screw type with lubricant drain cycles of up to 2000 hours under normal use. Normal use in
screw type compressors is defined by a maximum air discharge temperature =/< 100°C as defined by ISO 6743-3:2003.SKU: CAS-IND-0016 -
-
CASTROL AIRCOL PD 150
Castrol Aircol™ PD oils are a range of compressor lubricants, based upon highly refined mineral oils, which are intended for the lubrication of both reciprocating and rotary air compressors.
Application
Aircol™ PD grades are ashless oils recommended for the lubrication of rotors, bearings and gears in rotary compressors, especially the oil flooded screw type with lubricant drain cycles of up to 2000 hours under normal use.
Normal use in screw type compressors is defined by a maximum air discharge temperature =/< 100°C as defined by ISO 6743-3:2003.SKU: CAS-IND-0017 -
-
CASTROL AIRCOL PD 68
Castrol Aircol™ PD oils are a range of compressor lubricants, based upon highly refined mineral oils, which are intended for the lubrication of both reciprocating and rotary air compressors.
Application
Aircol™ PD grades are ashless oils recommended for the lubrication of rotors, bearings and gears in rotary compressors, especially the oil flooded screw type with lubricant drain cycles of up to 2000 hours under normal use.
Normal use in screw type compressors is defined by a maximum air discharge temperature =/< 100°C as defined by ISO 6743-3:2003.SKU: CAS-IND-0018 -
-
CASTROL AIRCOL SN 100
Castrol Aircol™ SN 100 compressor lubricant is high quality synthetic diester.
Application
Castrol Aircol SN 100 is a compressor lubricant developed to cope with the severe operating conditions experienced in rotary screw, rotary vane and reciprocating air compressors operating at high compression ratios and high discharge temperatures. Under these conditions Aircol SN 100 offers much reduced carbon forming tendencies and extended oil life when compared to mineral oils due to the much higher oxidation resistance. In reciprocating units, Aircol SN 100 has up to eight times the service life of mineral oils.
SKU: CAS-IND-0019 -
-
CASTROL AIRCOL SN 68
The Castrol Aircol™ SR compressor oil range of premium lubricants are designed for use in rotary screw compressors and are based on polyalphaolefin (PAO) fluids.
Application
Aircol SR is suitable for use in oil flooded rotary screw compressors operating under extreme climatic conditions, harsh environments and severe operating conditions where very high air discharge temperatures (> 100°C) are experienced.
These oils are also suitable for use in compressor units operating at normal operating conditions, with the maximum air discharge temperature =/< 100°C, as defined by ISO 6743-3:2003. For normal operating conditions, these products can be used for extended drain intervals up to 8000 hours.SKU: n/a -
-
CASTROL AIRCOL SR 46
The Castrol Aircol™ SR compressor oil range of premium lubricants are designed for use in rotary screw compressors and are based on polyalphaolefin (PAO) fluids.
Application
Aircol SR is suitable for use in oil flooded rotary screw compressors operating under extreme climatic conditions, harsh environments and severe operating conditions where very high air discharge temperatures (> 100°C) are experienced.
These oils are also suitable for use in compressor units operating at normal operating conditions, with the maximum air discharge temperature =/< 100°C, as defined by ISO 6743-3:2003. For normal operating conditions, these products can be used for extended drain intervals up to 8000 hours.SKU: CAS-IND-0021 -
-
CASTROL ALMAREDGE BI
Castrol Almaredge™ BI (previously called Cooledge™ BI) is a general purpose soluble metalworking fluid which is chlorine and boron-free. It contains a unique additive package that provides good lubrication properties and performs well in a wide water range. Almaredge BI can be used in single sump machines as well large systems.
Application
Almaredge BI is a versatile product recommended for general machining on low-medium alloy steel and aluminium alloys.Download Product Data Sheet Here
SKU: CAS-IND-0023
