1LTR
Showing 1–12 of 57 results
-
-
CASTROL 2T
Castrol 2T is a modern, mineral based 2-stroke oil designed to give good all round performance in most 2-stroke motorcycles and other small engine applications. It’s low ash formula will help to protect against pre-ignition and provide good engine lubrication and cleanliness to maintain good compression and reliable engine startability throughout its life.
Application
Castrol 2T is suitable for use in most 2-stroke motorcycle and scooter engines which require good quality mineral engine oil. It is designed for both oil injection and pre-mix lubrication, as per manufacturers’ instructions, up to a fuel/oil ratio of 50:1.
SKU: CAS-AUT-0001 -
-
CASTROL ACTEVO 4T 10W-40
Castrol Actevo 4T 10W-40 is a latest generation, part-synthetic engine oil developed specifically for 4-stroke motorcycle engines. It is uniquely formulated with Active Protection Molecules (APM), which provide a continuous layer of protection, ensuring up to 70% wear reduction when compared to a JASO MA-2 motorcycle oil, tested in a standard ASTM wear test.
Castrol Actevo 4T 10W-40 is uniquely formulated with Trizone Technology™ – Trizone testing uses Castrol’s own engine test methods to prove performance in the engine (good detergency and durability), reduced clutch slip and reduced gear pitting.
Castrol Actevo 4T 10W-40 has been tested over the equivalent of 600,000 km to ensure outstanding protection for motorcycles and scooters.
Application
Castrol Actevo 4T 10W-40 is suitable for four-stroke motorcycle engines where API SJ and JASO MA2 specifications are recommended.
Advantages
- Outstanding protection for four-stroke motorcycle engines.
- Protects from the start to the end of every journey.
- 70% greater wear protection, compared with a JASO MA2 oil, tested in a standard ASTM wear test.
- Active Protection Molecules (APM) cling to critical engine components.
- Actevo 4T is specially designed with Trizone Technology™.
- Continuous protection at all operating temperatures.
- Actevo 4T produces no rust in salt water corrosion tests
SKU: CAS-AUT-0024 -
-
CASTROL BOT 402
Castrol BOT 402 is a fully synthetic SAE 75W-85 manual transmission fluid.
Castrol BOT 402 can be recommended for most manual transmissions where API GL-4 lubricants are required.
Castrol BOT 402 meets Opel’s requirements for use in the manual transmission of all front wheel drive (FWD) and rear wheel drive (RWD) passenger cars worldwide.
BENEFITS
- Smoother and easier gear shift due to a combination of reduced shifting forces and optimal synchronisation.
- Reduced torque loss increases efficiency over all transmission load ranges.
- Increased wear protection of synchronizer and bearings during startup phase.
- Fuel saving potential – less fuel consumption means lower emissions.
- Improved shift comfort and prevention of “synchroniser clash” during gear change at a wide range of ambient temperatures and operating conditions.
- Extended synchroniser life reduces warranty and maintenance costs.
- Optimal lubrication of transmission components enhances performance and life.
- Maintains noise reduction (eg : in-gear rattle; idling rattle), improved driver satisfaction.
- Excellent transmission cleanliness and longer oil life permit decreased servicing.
- Longer oil and component life permit extended drain and decreased servicing.
- Helps protect surface of moving parts, extending transmission life.
- Helps avoid oil leakages, reducing repair costs.
- Better environmental compatibility – easier waste oil disposal and recyclability.
[pdf-embedder url=”http://store.lsg-gh.com/wp-content/uploads/2020/08/TRA-0007.pdf”]
SKU: CAS-AUT-0006 -
-
CASTROL EDGE 0W-30
Description
Advances in engine technology have led to increased power and efficiency, meaning engines work harder and under higher pressures than
ever before. The only thing keeping metal engine components apart is the oil, so it needs to be strong and remain strong.
Castrol EDGE is our strongest and most advanced range of engine oils. Its TITANIUM FST™ doubles its film strength, preventing oil film
breakdown and reducing friction.
Castrol EDGE with TITANIUM FST™: helping your engine perform at its best.
Application
Castrol EDGE 0W-30 is suitable for use in automobile, gasoline and diesel engines where the manufacturer recommends an ACEA C3, API
SN or earlier specification.
Castrol EDGE 0W-30 is approved for use in vehicles from leading manufacturers, please refer to the specifications section and your owners
handbook.
Advantages
Castrol EDGE 0W-30 gives you the confidence to demand maximum engine performance from today’s latest technology, highly engineered
engines that operate with tighter tolerances, requiring a high level of protection and low viscosity oils.
Castrol EDGE 0W-30:- Maximizes short and long term engine performance
- Reduces engine deposits to help maximize engine response
- Delivers unsurpassed levels of protection across a variety of driving conditions and temperatures
- Sustains maximum performance even when under pressure
- Independently proven to improve engine efficiency
- Excellent performance at low temperatures
Download Product Data Sheet Here
SKU: n/a -
-
CASTROL EDGE 0W-30 A5/B5
Description
Advances in engine technology have led to increased power and efficiency, meaning engines work harder and under
higher pressures than ever before.
The only thing keeping metal engine components apart is the oil, so it needs to be strong and remain strong.
Castrol EDGE is our strongest and most advanced range of engine oils. Its TITANIUM FST™ doubles its film strength,
preventing oil film breakdown and reducing friction.
Castrol EDGE with TITANIUM FST™: helping your engine perform at its bestApplication
Castrol EDGE 0W-30 A5/B5 is suitable for use in automobile, gasoline and diesel engines where the manufacturer
recommends an ACEA A1/B1, A5/B5, API SL/CF specification 0W-30 lubricant.
Castrol EDGE 0W-30 A5/B5 is approved for use in Volov cars that require a Volvo 95200377 specification 0W-30
lubricant, Please refer to your owners handbook.Advantages
Castrol EDGE 0W-30 A5/B5 is gives you the confidence to demand maximum engine performance from the latest
efficient technology engines requiring the lower viscosity and longer drain oils.
Castrol EDGE 0W-30 A5/B5
Maximises short and long term engine performance
Reduces engine deposits to help maximise engine response
Delivers complete protection across a variety of engine speeds, conditions and temperatures
Sustains maximum performance even when under pressure
Independently proven to Improve engine efficiency
Excellent performance at low temperaturesSKU: CALL FOR PRICE -
-
CASTROL EDGE 0W-40 A3/B4
Description
Today’s engines continually push the boundaries of technology and engineering. They are smaller and ultra-efficient,
without sacrificing performance. Advanced engines challenge the oil with increased pressures.
These intense pressures cause friction, which can waste up to 10% of an engine’s performance.
Castrol EDGE with patented Fluid TITANIUM transforms its physical structure to be stronger under pressure to keep
metal apart and reduces friction for maximum engine performance when you need it most.
Castrol EDGE with Fluid TITANIUM: unlock the true performance of your engine.Application
Castrol EDGE 0W-40 A3/B4 is suitable for use in automotive petrol and diesel engines where the manufacturer
recommends: API SN/CF, ACEA A3/B3, A3/B4 or earlier specifications.
Castrol EDGE 0W-40 A3/B4 is approved by leading car manufacturers.
Please refer to your owners handbook.Advantages
Castrol EDGE 0W-40 A3/B4 with Fluid TITANIUM is the natural choice for drivers who demand maximum engine
performance from today’s modern vehicles requiring a high level of protection and higher performance oils.
Castrol EDGE 0W-40 A3/B4:- Transforms to be strongest when the pressure is highest, protecting your engine
- Reduces power-robbing friction across engine speeds and conditions
- Independently tested at the highest standards for proven performance
- Recommended by world-leading car manufacturers
- Protects the engine for the entire drain interval even under extreme pressure
- Delivers high levels of fuel efficiency and low temperature performance
SKU: n/a -
-
CASTROL EDGE 10W-60 SUPERCAR
Advances in engine technology have led to increased power and efficiency, meaning engines work harder and under higher pressures than ever before.
The only thing keeping metal engine components apart is the oil, so it needs to be strong and remain strong.
Castrol EDGE is our strongest and most advanced range of engine oils. Its TITANIUM FST™ doubles its film strength, preventing oil film breakdown and reducing friction.
Castrol EDGE with TITANIUM FST™: helping your engine perform at its best.
Application
Castrol EDGE 10W-60 SN is suitable for use in automobile, gasoline and diesel engines where the manufacturer recommends an ACEA A3/B3, A3/B4, API SN/CF or earlier specification 10W-60 lubricant.
Advantages
Castrol EDGE 10W-60 SN gives you the confidence to demand maximum engine performance from sports cars, competition and the latest technology high powered engines which operate under higher pressures requiring an oil with unsurpassed strength and performance credentials.
Castrol EDGE 10W-60 SN:
- Maximises short and long term engine performance
- Reduces engine deposits to help maximise engine response
- Delivers complete protection across a variety of driving conditions and temperatures
- Delivers and sustains maximum horsepower for longer, even when under pressure
Download Product Data Sheet Here
SKU: CAS-AUT-0030 -
-
CASTROL EDGE 5W-30 M
Description
Advances in engine technology have led to increased power and efficiency, meaning engines work harder and under
higher pressures than ever before. This means the oil has to be stronger to reduce friction and protect the engine.
Castrol EDGE is our most advanced engine oil range. It provides the strength to help maximise your vehicles
performance.
Castrol EDGE: stronger under pressure.Application
Castrol EDGE 5W-30 M is suitable for use in automotive gasoline and diesel vehicles where the manufacturer
recommends an ACEA C3, API SN PLUS 5W-30 lubricant.
Castrol EDGE 5W-30 M is approved for use in vehicles from leading manufacturers, please refer to the specifications
section and your owners handbook.Advantages
Castrol EDGE 5W-30 M is the natural choice for drivers who demand maximum engine performance from today’s
modern vehicles requiring a high level of protection and higher performance oils.
Castrol EDGE 5W-30 M:- Independently tested at the highest standards
- Recommended by world-leading car manufacturers
- Protects the engine for the entire drain interval even under extreme pressure
- Proven performance across a variety of driving conditions and temperature
SKU: n/a -
-
CASTROL EDGE 5W-40 A3/B4
Today’s engines continually push the boundaries of technology and engineering. They are smaller and ultra-efficient, without sacrificing performance. Advanced engines challenge the oil with increased pressures. These intense pressures cause friction, which can waste up to 10% of an engine’s performance.
Castrol EDGE with patented Fluid TITANIUM Technology transforms its physical structure to be stronger under pressure to keep metal apart and reduces friction for maximum engine performance when you need it most.
Castrol EDGE with Fluid TITANIUM Technology: unlock the true performance of your engine.
Application
Castrol EDGE 5W-40 A3/B4 is suitable for use in automotive gasoline and diesel vehicles where the manufacturer recommends: ACEA A3/B3, A3/B4, API SN/CF
Castrol EDGE 5W-40 A3/B4 is approved for use in vehicles from leading manufacturers: Refer to the Product Performance Claims section.
Please refer to your owners handbook.
Advantages
Castrol EDGE 5W-40 A3/B4 with Fluid TITANIUM Technology is the natural choice for drivers who demand maximum engine performance from today’s modern vehicles requiring a high level of protection and higher performance oils.
Castrol EDGE 5W-40 A3/B4:
-Transforms to be strongest when the pressure is highest, protecting your engine
-Reduces power-robbing friction across engine speeds and conditions
-Independently tested at the highest standards for proven performance
-Recommended by world-leading car manufacturers
-Protects the engine for the entire drain interval even under extreme pressure
Download Product Data Sheet Here
SKU: CAS-AUT-0032 -
-
CASTROL EDGE 5W-40 M
Description
Advances in engine technology have led to increased power and efficiency, meaning engines work harder and under
higher pressures than ever before. This means the oil has to be stronger to reduce friction and protect the engine.
Castrol EDGE is our most advanced engine oil range. It provides the strength to help maximise your vehicles
performance.
Castrol EDGE: stronger under pressure.Application
Castrol EDGE 5W-40 M is suitable for use in automotive gasoline and diesel vehicles where the manufacturer
recommends an ACEA C3, API SN 5W-40 lubricant.
Castrol EDGE 5W-40 M is approved for use in vehicles from leading manufacturers. Please refer to your owners
handbook.Advantages
Castrol EDGE 5W-40 M is the natural choice for drivers who demand maximum engine performance from today’s
modern vehicles requiring a high level of protection and higher performance oils.
Castrol EDGE 5W-40 M:- Independently tested at the highest standards
- Recommended by world-leading car manufacturers
- Protects the engine for the entire drain interval even under extreme pressure
- Proven performance across a variety of driving conditions and temperatures
SKU: n/a -
-
CASTROL EDGE PROFESSIONAL A1 5W-20
Castrol EDGE Professional, boosted with TITANIUM FST™, provides outstanding oil strength for today’s engines that work harder, with higher pressures than ever before.
Castrol EDGE is our strongest and most advanced range of engine oils. Its TITANIUM FST™ doubles its film strength, preventing oil film breakdown and reducing friction.
Castrol EDGE Professional with TITANIUM FST™ : helping your engine perform at its best.
Castrol EDGE Professional is now certified CO2 neutral according to the highest global standards. Engineered with Micro-Filtration in order to meet Castrol Professional’s new quality standard and
verified using Castrol’s new Optical Particle Measurement System (OPMS) to guarantee product quality. Complete with UV tracer as signature of product authenticity.
Application
Castrol EDGE Professional A1 5W-20 is suitable for use in automotive gasoline and diesel engines where the manufacturer recommends :
SAE 5W-20, API SL, ILSAC GF-3, ACEA A1/B1 or earlier specifications .
Castrol EDGE Professional A1 5W-20 is recommended and approved for use in Jaguar Landrover vehicles that require Jaguar Landrover – ST JLR.03.5004 specification
Advantages
Castrol EDGE Professional A1 5W-20 gives you the confidence to demand maximum engine performance from today’s latest technology, highly engineered engines that operate with tighter tolerances, requiring a high level of protection and low viscosity oils.
Castrol EDGE Professional A1 5W-20:
- -Maximises short and long term engine performance
- -Reduces engine deposits to help maximise engine response
- -Sustains maximum performance even when under pressure
- -Independently proven to Improve engine efficiency
- -Delivers unsurpassed levels of protection across a variety of driving conditions and temperatures
Download Product Data Sheet Here
SKU: CAS-AUT-0033 -
-
CASTROL EDGE PROFESSIONAL A3 0W-30
Description
Castrol EDGE Professional, boosted with TITANIUM FST™, provides outstanding oil strength for today’s engines that
work harder, with higher pressures than ever before.
Castrol EDGE is our strongest and most advanced range of engine oils. Its TITANIUM FST™ doubles its film strength,
preventing oil film breakdown and reducing friction.
Castrol EDGE Professional with TITANIUM FST™: helping your engine perform at its best.
Castrol EDGE Professional is now certified CO2 neutral according to the highest global standards.
Engineered with Micro-Filtration in order to meet Castrol Professional’s new quality standard and verified using
Castrol’s new Optical Particle Measurement System (OPMS) to guarantee product quality.Application
Castrol EDGE Professional A3 0W-30 is suitable for use in automotive gasoline and diesel engines where the
manufacturer recommends an ACEA A3/B3, A3/B4, API SL/CF or earlier specification 0W-30 lubricant .
Castrol EDGE Professional A3 0W-30 is recommended and approved for use in OEM vehicles that require a BMW
Longlife 01, MB-Approval 229.3/ 229.5, VW 502 00/ 505 00 specification 0W-30 lubricant.Conditions of Use
Castrol EDGE Professional A3 0W-30 gives you the confidence to demand maximum engine performance from today’s
latest technology, highly engineered engines that operate with tighter tolerances, requiring a high level of protection and
low viscosity oils.Castrol EDGE Professional A3 0W-30:
- Maximises short and long term engine performance
- Reduces engine deposits to help maximise engine response
- Delivers complete protection across a variety of engine speeds, conditions and temperatures
- Sustains maximum performance even when under pressure
- Independently proven to Improve engine efficiency
- Delivers unsurpassed levels of protection across a variety of driving conditions and temperatures
- Excellent performance at low temperatures
SKU: n/a
