Search results: “castrol”
Showing 1–12 of 156 results
-
-, CASTROL MOTOR BIKES, MOTOR BIKES
CASTROL 2T
Castrol 2T is a modern, mineral based 2-stroke oil designed to give good all round performance in most 2-stroke motorcycles and other small engine applications. It’s low ash formula will help to protect against pre-ignition and provide good engine lubrication and cleanliness to maintain good compression and reliable engine startability throughout its life.
Application
Castrol 2T is suitable for use in most 2-stroke motorcycle and scooter engines which require good quality mineral engine oil. It is designed for both oil injection and pre-mix lubrication, as per manufacturers’ instructions, up to a fuel/oil ratio of 50:1.
SKU: CAS-AUT-0001 -
-, FULLY SYNTHETIC MANUAL TRANSMISSION
CASTROL BOT 402
Castrol BOT 402 is a fully synthetic SAE 75W-85 manual transmission fluid.
Castrol BOT 402 can be recommended for most manual transmissions where API GL-4 lubricants are required.
Castrol BOT 402 meets Opel’s requirements for use in the manual transmission of all front wheel drive (FWD) and rear wheel drive (RWD) passenger cars worldwide.
BENEFITS
- Smoother and easier gear shift due to a combination of reduced shifting forces and optimal synchronisation.
- Reduced torque loss increases efficiency over all transmission load ranges.
- Increased wear protection of synchronizer and bearings during startup phase.
- Fuel saving potential – less fuel consumption means lower emissions.
- Improved shift comfort and prevention of “synchroniser clash” during gear change at a wide range of ambient temperatures and operating conditions.
- Extended synchroniser life reduces warranty and maintenance costs.
- Optimal lubrication of transmission components enhances performance and life.
- Maintains noise reduction (eg : in-gear rattle; idling rattle), improved driver satisfaction.
- Excellent transmission cleanliness and longer oil life permit decreased servicing.
- Longer oil and component life permit extended drain and decreased servicing.
- Helps protect surface of moving parts, extending transmission life.
- Helps avoid oil leakages, reducing repair costs.
- Better environmental compatibility – easier waste oil disposal and recyclability.
[pdf-embedder url=”http://store.lsg-gh.com/wp-content/uploads/2020/08/TRA-0007.pdf”]
SKU: CAS-AUT-0006 -
-, GREASES
CASTROL MS GREASE
Castrol MS Grease is an NLGI No. 2 lithium soap grease containing a proportion of Molybdenum Disulphide (MoS2) to offer lubrication even when the grease is forced out of the bearing. Castrol MS Grease is suitable for shock loaded bearings where the solid lubricant provides more anti-wear protection than a normal grease. Suitable for CV joints, universal joints and so on. Suitable for use at operating temperatures between -30ºC and 130ºC.
[pdf-embedder url=”http://store.lsg-gh.com/wp-content/uploads/2020/08/GRE-0029.pdf”]
SKU: CAS-IND-0008 -
-, GREASES
CASTROL WB GREASE
Castrol WB Grease is a high quality, NLGI Grade 3 lubricating grease based on an optimised combination of lithium thickener, high viscosity mineral oil and polymer technology.
Application
The combination of high viscosity base oils, polymer and lithium thickener technology make Castrol WB Grease suitable for use in a wide variety of components including rolling element bearings and chassis points where operating conditions involve slow speeds and the requirement for a grease offering good film strength and adhesive qualities.
Castrol WB Grease is particularly suitable for use in wheel bearings and slow speed rolling element bearings found on heavy duty mining and construction equipment where peak temperatures do not exceed 120°C.
Advantages
- -Lithium thickener technology offers excellent shear stability enabling long service life and relubrication periods.
- -High base oil viscosity enhances lubricant film strength in heavy duty applications protecting components from
- -NLGI 3 consistency provides greater resistance to the effects of severe vibration that can be more prevalent in thetarget applications.
- -Polymer technology enhances adhesive properties.
Download Product Data Sheet Here
SKU: CAS-IND-0014 -
-, ATF FOR BUSES AND TRUCKS
CASTROL TRANSMAX Z
Castrol Transmax Z, formulated with Smooth Drive Technology ™, is a full synthetic automatic transmission fluid. It can solve shiftability problems in automatic transmissions, enabling longer transmission life. It is particularly recommended for use in automatic and semi automatic transmissions used in cars, buses and coaches. As such it is recommended for fleets employing a mixture of Voith, Renk, ZF, Allison and MB transmissions alongside the Leyland Pneumocyclic and Hydracyclic units. Extended oil drain [120.000 km] in ZF Ecomat and EcoLife, MB AT and Voith AT. Castrol Transmax Z, formulated with Smooth Drive Technology™, delivers enhanced protection and gives drivers a smoother drive for longer.
Download Product Data Sheet Here
SKU: CAS-AUT-0022 -
-, GREASES
CASTROL CLS GREASE
Castrol CLS is a semi-fluid, extreme pressure grease developed using an optimised combination of synthetic base oil, lithium thickener technology and a specially selected additive system incorporating EP/Anti-wear additives, anti-oxidants and corrosion inhibitors.
Application
Castrol CLS is a high quality semi-fluid EP grease with excellent low temperature properties that make it particularly suitable for use in the central lubricating systems of commercial vehicles and is approved according to:
-MAN 283 Li-P 00/000
-Mercedes Benz 264.0
Castrol CLS is also considered an excellent mutipurpose semi-fluid grease for Industrial and Automotive applications generally where a combination of excellent extreme pressure performance and corrosion resistance are core requirements.
Advantages
-Good mechanical stability enables extended service operation.
-Excellent extreme pressure performance offering enhanced component protection.
-Excellent corrosion protection provides extended service in more exposed operational environments.
-Superior cold flow properties enable year-round use.
Download Product Data Sheet Here
SKU: CAS-IND-0033 -
-
CASTROL EDGE 0W-30
Description
Advances in engine technology have led to increased power and efficiency, meaning engines work harder and under higher pressures than
ever before. The only thing keeping metal engine components apart is the oil, so it needs to be strong and remain strong.
Castrol EDGE is our strongest and most advanced range of engine oils. Its TITANIUM FST™ doubles its film strength, preventing oil film
breakdown and reducing friction.
Castrol EDGE with TITANIUM FST™: helping your engine perform at its best.
Application
Castrol EDGE 0W-30 is suitable for use in automobile, gasoline and diesel engines where the manufacturer recommends an ACEA C3, API
SN or earlier specification.
Castrol EDGE 0W-30 is approved for use in vehicles from leading manufacturers, please refer to the specifications section and your owners
handbook.
Advantages
Castrol EDGE 0W-30 gives you the confidence to demand maximum engine performance from today’s latest technology, highly engineered
engines that operate with tighter tolerances, requiring a high level of protection and low viscosity oils.
Castrol EDGE 0W-30:- Maximizes short and long term engine performance
- Reduces engine deposits to help maximize engine response
- Delivers unsurpassed levels of protection across a variety of driving conditions and temperatures
- Sustains maximum performance even when under pressure
- Independently proven to improve engine efficiency
- Excellent performance at low temperatures
Download Product Data Sheet Here
SKU: n/a -
-, NEAT CUTTING OIL
CASTROL ILOCUT 170
Castrol Ilocut™ 170 is a chlorinated, heavy metal free neat cutting oil.
Application
Ilocut 170 is mainly designed for gun drilling of ferrous and non-ferrous metalls. It can be further used for honing and general machining application.
Download Product Data Sheet Here
SKU: CAS-IND-0041 -
-
CASTROL LMX GREASE
This is a multi-purpose high performance grease, based on mineral oil and thickened with lithium-complex soap. It is formulated to provide excellent high-temperature lubrication performance. It possesses EP (extremepressure) load-carrying properties, and contains additives selected to enhance resistance to oxidation, corrosion and wear.
APPLICATION
-Castrol LMX is formulated for use in grease-lubricated plain or rolling bearings operating at temperatures from –30 °C to 150 °C (continuous rating).
-It may also be used for short periods at temperatures of up to 180 °C in bearings designed to operate under such conditions. In such cases, the frequency of re-lubrication should be increased, operators should contact equipment manufacturers for guidance.
-Examples of applications include automotive wheel bearings, all types of general industrial machinery, electric motors and machine tools, as well as applications involving higher temperature such as are found in papermaking machinery and oven fans.
-In addition, its good EP characteristics and low slumpability are advantageous in bearings involving both high loaded applications and vibratory conditions, such as in steel mills, railway axle-boxes and construction equipment.
-High Drop Point and excellent stability at high operating temperatures make this a good alternative to claythickened high-temperature greases, the long service-life potential of Castrol LMX at temperatures over 100°C makes it ideally suited to machines in which poor accessibility makes frequent re-lubrication difficult, whilst the longer permissible lubrication intervals maintenance costs.
FEATURES / BENEFITS
-Multi-purpose application in both industrial and automotive fields.
-High Drop Point and high operating-temperature capability.
-Long life relative to conventional lithium grease.
-Excellent EP and anti-wear properties.
-Low oil-separation characteristics.
-Excellent corrosion resistance.
-Very good pumpability for this grade of grease, especially at low temperatures.
Download Product Data Sheet Here
SKU: CAS-IND-0043 -
-, CASTROL ENGINE OIL, ENGINE OIL
Castrol Edge 5W-40
Castrol EDGE 5W-40 is a full synthetic engine oil.
Advances in engine technology have led to increased power and efficiency, meaning engines work harder and under higher pressures than ever before.
The only thing keeping metal engine components apart is the oil, so it needs to be strong and remain strong.
Castrol EDGE is our strongest and most advanced range of engine oils. Its TITANIUM FST™ doubles its film strength, preventing oil film breakdown and reducing friction.
Castrol EDGE with TITANIUM FST™: helping your engine perform at its best.
Application
Castrol EDGE 5W-40 is suitable for use in automobile, petrol and diesel engines where the manufacturer recommends an ACEA C3, API SN or earlier specification.
Castrol EDGE 5W-40 is approved for use in vehicles from leading manufacturers, please refer to the specifications section and your owners handbook.
*GM dexos2®: supersedes GM-LL-B-025 and GM-LL-A-025 : GB2D0114082
Advantages
Castrol EDGE 5W-40 gives you the confidence to demand maximum engine performance from today’s latest technology, highly engineered engines that operate with tighter tolerances, requiring a high level of protection and low viscosity oils.
Castrol EDGE 5W-40:
- -Maximises short and long term engine performance
- -Reduces engine deposits to help maximise engine response
- -Delivers unsurpassed levels of protection across a variety of driving conditions and temperature
- -Independently proven to Improve engine efficiency
- -Delivers and sustains maximum horsepower for longer, even when under pressure
SKU: CAS-AUT-0009
