INDUSTRIAL SYNTHETIC GEAR OIL
Showing all 5 results
-
-, INDUSTRIAL SYNTHETIC GEAR OIL
Castrol Alphasyn EP 220
Castrol Alphasyn™ EP 220 gear oil is a high quality synthetic lubricant based on poly- alphaolefin (PAO) fluids and sulphur/phosphorus Extreme Pressure (EP) additive technology providing good thermal stability and high load carrying capacity.
Application
Alphasyn EP 220 has been formulated for use in all types of enclosed gears including heavy and shock-loaded gears and bearings where EP properties are required. It is suitable for use in gearboxes where micro-pitting resistance is required and for a wide range of applications in extreme environments, for example mining and quarrying, marine applications and paper production.
Download Product Data Sheet Here
SKU: CAS-IND-0028 -
-, INDUSTRIAL SYNTHETIC GEAR OIL
Castrol Alphasyn PG 220
Castrol Alphasyn™ PG 220 gear oil is a synthetic lubricant based on polyalkyleneglycol (PAG) fluids enhanced with antioxidants, rust inhibitors and Extreme Pressure (EP) additives of high thermal stability.
Application
Alphasyn PG 220 gear oil is primarily intended for use in worm reduction gearboxes, where the low coefficient of friction of the PAG base fluid improves efficiency and consequently reduces power consumption and operating temperatures.
This is particularly important in applications where sliding contact is high.
The use of a PAG base stock provides inherently high Viscosity Index (VI) and low pour point makes the product suitable for use over a wide temperature range. Alphasyn PG 220 meets the requirements of most OEM’s that allow the use of PAG based gear oils.
Advantages
-Low coefficient of friction reduces energy consumption and lowers operating temperatures, this leads to longer oil life.
-Good thermal and oxidative stability provides reliable operation and extended operating life when compared to mineral oil based products.
-Inherently high VI makes the product suitable for operations over a wide temperature range.
-High load carrying capacity and good wear protection reduces maintenance.
Download Product Data Sheet Here
SKU: CAS-IND-0029 -
-, INDUSTRIAL SYNTHETIC GEAR OIL
Castrol Molub Alloy OG 936 SF NG
CASTROL MOLUB-ALLOY™OG 936 SF NG (previously named Molub-Alloy 936 SF NG) is a uniquely compounded open gear lubricant developed specifically for use on heavy duty mining equipment. It is compounded to give maximum protection to gears and slides on draglines and shovels minimising potential pollution to the environment. Formulated to address environmental concerns, CASTROL MOLUB- ALLOY™ OG 936 SF NG is free of lead, antimony, barium and chlorinated solvents. No solvents of any kind are used.
A highly refined, viscous, paraffinic petroleum derivative is the foundation of a blended base fluid with excellent natural chemical and thermal stability. CASTROL MOLUB-ALLOY™ OG 936 SF NG is compounded to flow readily in the film-forming process, yet it resists “squeeze-out” and clings tenaciously to gear teeth even in vertical position.
A proprietary blend of CASTROL MOLUB-ALLOY™ lubricating solids is included to promote antiwear and load carrying properties beyond those of conventional lubricants. The selected lubricating solids work synergistically with chemical antiwear and EP additives, to reduce friction.
Rust and oxidation inhibitors are included in the formulation to protect the equipment and the lubricating film against the elements in severe climates.
Application
Mining applications include all types of open gears, rails and rollers, racks and pinions, dipper sticks, saddle blocks and other slides on draglines and shovels.
Advantages
-CASTROL MOLUB-ALLOY™ OG 936 SF NG is free of solvents and materials considered to be hazardous to the environment.
-CASTROL MOLUB-ALLOY™ OG 936 SF NG forms a tough, durable lubricating film with a “cushioning” effect, even under extreme pressure and at low speeds. The film resists erosion from rain or sleet and resists peeling in dusty environments.
Download Product Data Sheet Here
SKU: CAS-IND-0047 -
-, INDUSTRIAL SYNTHETIC GEAR OIL
Castrol Optigear Synthetic X 320
Castrol Optigear™ Synthetic X 320 is based on synthetic hydrocarbons and Castrol’s Microflux Trans (MFT) Plastic Deformation (PD) additive and surface improvement additive package.
MFT PD helps improve lubricant performance when operating temperature and loads reach a certain level of activation energy, by enabling the micro-smoothing of surface roughness without increasing wear. The smoothed surface delivers optimum wear protection and an extremely low coefficient of friction, especially in applications which experience extreme pressure, shock loads, vibrations or low speeds. MFT PD helps to protect against scuffing and shock loading, while maintaining a high load carrying capacity, and can help prevent the progression of micro-pitting in pre-damaged gears.
Application
Optigear Synthetic X 320 may be used in spur gear, bevel gears or planetary gear units and in heavy loaded gear units, e.g. wind turbine main gears. It is also suitable for the lubrication of oil-lubricated rolling bearings.
Depending on the specific application, Optigear Synthetic X may be used in an operating temperature range from -35°C/31°F to +95°C/203°F (refer to a Castrol technician for more information, if necessary).
Optigear Synthetic X is a CLP-HC gear oil (according to DIN 51502) and exceeds the minimum requirements according to DIN 51517 (2003), part 3, CLP gear oils.
Advantages
Optigear Synthetic X 320 has the following advantages when compared to product in a similar class:
-High load carrying capacity.
-Superior micropitting protection.
-Excellent friction reduction.
-Good filtration properties.
-Excellent bearing lubrication suitability.
Download Product Data Sheet Here
SKU: CAS-IND-0049 -
-, INDUSTRIAL SYNTHETIC GEAR OIL
Castrol Optileb GT 220
OPTILEB™ GT 220 is a gear oil with NSF H1 authorization, especially developed to meet the special requirements in the food and beverage industries. It is based on synthetic oils and contain carefully selected additives to prevent wear, oxidation and corrosion. OPTILEB GT 220 gear oil is in conformity and even exceed the requirements of DIN 51517 part 3 CLP.
SKU: CAS-IND-0051
