-
-, GREASES
CASTROL MS GREASE
Castrol MS Grease is an NLGI No. 2 lithium soap grease containing a proportion of Molybdenum Disulphide (MoS2) to offer lubrication even when the grease is forced out of the bearing. Castrol MS Grease is suitable for shock loaded bearings where the solid lubricant provides more anti-wear protection than a normal grease. Suitable for CV joints, universal joints and so on. Suitable for use at operating temperatures between -30ºC and 130ºC.
[pdf-embedder url=”http://store.lsg-gh.com/wp-content/uploads/2020/08/GRE-0029.pdf”]
SKU: CAS-IND-0008 -
-, CASTROL MOTOR BIKES, MOTOR BIKES
CASTROL 2T
Castrol 2T is a modern, mineral based 2-stroke oil designed to give good all round performance in most 2-stroke motorcycles and other small engine applications. It’s low ash formula will help to protect against pre-ignition and provide good engine lubrication and cleanliness to maintain good compression and reliable engine startability throughout its life.
Application
Castrol 2T is suitable for use in most 2-stroke motorcycle and scooter engines which require good quality mineral engine oil. It is designed for both oil injection and pre-mix lubrication, as per manufacturers’ instructions, up to a fuel/oil ratio of 50:1.
SKU: CAS-AUT-0001 -
-, CASTROL ENGINE OIL, ENGINE OIL
Castrol GTX 20W-50
Castrol GTX is one of the world’s most trusted motor oils.
It’s more than just oil. It’s liquid engineering that protects against problems, like sludge, that your engine faces every day.
Severe driving conditions such as every day stop-and-go/stop-start traffic, harsh weather conditions and extended drain intervals, can all cause the build-up of a thick, tar-like substance called sludge.
You can’t see this sludge build-up but it can damage your engine’s performance and cause premature engine failure.
Protect your car from harmful sludge build-up with Castrol GTX
Application
Castrol GTX 20W-50 is suitable for use in automotive gasoline and diesel engines where the manufacturer recommends an API SL/CF or earlier specification 20W-50 lubricant.
Advantages
Castrol GTX 20W-50
– Contains anti-sludge formula that provides 25% better sludge protection compared to tough industry standards*
– Superior protection against viscosity and thermal breakdown
– Anti-wear additives that extend the life of your engine
SKU: CAS-AUT-0011 -
-
CASTROL GTX ESSENTIAL 15W-40
Castrol GTX is one of the world’s most trusted engine oils
It’s more than just oil. It’s liquid engineering that protects against the problems your engine faces every day.
Car maintenance can be expensive, but poor engine oils can risk the life of your engine and hurt the value of your investment.
Castrol GTX Essential does essential maintenance of your engine by helping keep it clean and fighting wear, bringing with it the trust of a brand used by millions of mechanics worldwide.
Help extend the life of your engine with Castrol GTX Essential.
Application
Castrol GTX Essential is suitable for use in automotive gasoline engines where the manufacturer recommends an API SL or earlier specification 20W-50 lubricant.
Advantages
Castrol GTX Essential provides:
- -Protection against engine sludge
- -Viscosity stability
- -Pressure control
- -Helps minimize oil consumption
Download Product Data Sheet Here
SKU: CAS-AUT-0039 -
-, CASTROL ENGINE OIL, ENGINE OIL
Castrol Edge Professional TW-S 10W-60
Castrol EDGE Professional, boosted with TITANIUM FST™, provides outstanding oil strength for today’s engines that work harder, with higher pressures than ever before.
Castrol EDGE is our strongest and most advanced range of engine oils. Its TITANIUM FST™ doubles its film strength, preventing oil film breakdown and reducing friction.
Castrol EDGE Professional with TITANIUM FST™: helping your engine perform at its best.
Castrol EDGE Professional is now certified CO2 neutral according to the highest global standards. Engineered with Micro-Filtration in order to meet Castrol Professional’s new quality standard and verified using Castrol’s new Optical Particle Measurement System (OPMS) to guarantee product quality.
Application
Castrol EDGE Professional OE 5W-30 is suitable for use in automotive gasoline and diesel engines where the manufacturer recommends :
5W-30,API SN, ACEA C3 or earlier specifications .
Castrol EDGE Professional OE 5W-30 is recommended and approved for use in vehicles from leading manufacturers, please refer to the specifications section and your owners handbook.
*GM dexos2®: supersedes GM-LL-B-025 and GM-LL-A-025 : GB2C0919082
Advantages
Castrol EDGE Professional OE 5W-30 gives you the confidence to demand maximum engine performance from today’s latest technology, highly engineered engines that operate with tighter tolerances, requiring a high level of protection and low viscosity oils.
Castrol EDGE Professional OE 5W-30:
- -Maximises short and long term engine performance
- -Reduces engine deposits to help maximise engine response
- -Sustains maximum performance even when under pressure
- -Independently proven to Improve engine efficiency
- -Delivers unsurpassed levels of protection across a variety of driving conditions and temperatures
Download Product Data Sheet Here
SKU: ENG-0116CAS-AUT-0036 -
-
Castrol GTX Essential 25W-50
It’s more than just oil. It’s liquid engineering.
Castrol GTX is one of the world’s most trusted engine oils.
It’s more than just oil. It’s liquid engineering that protects against the problems your engine faces every day.
Severe driving conditions can cause the build up of a thick, tar-like substance called sludge. Sludge can block your engine’s vital oilways like cholesterol – and if untreated it can rob an engine of power and, ultimately, its life.
Castrol GTX Essential 25W-50 is suitable for use in older generation normally aspirated and turbocharged petrol and diesel engines.
Help extend the life of your engine with Castrol GTX.
Application
Castrol GTX Essential 25W-50 is suitable for use in older generation normally aspirated and turbocharged petrol engines where the manufacturer recommends an API SG 25W-50 lubricant.
Advantages
Castrol GTX Essential 25W-50 provides:
- -Provides protection against engine sludge
- -Assists with reducing oil consumption
- -High level of fuel dilution capability
- -Excellent viscosity stability
- -Good oil pressure control
SKU: CAS-AUT-0013
Products Grid
Best Sellers
-
-
-
-
-
-
ADDINOL, ADDINOL AUTOMOTIVES, ADDINOL INDUSTRIALAddinol Diesel Longlife MD 1548
₵1,443.10 – ₵13,385.88
Recently Added
Castrol GTX Diesel 15W-40
Castrol GTX is one of the world’s most trusted engine oils.
It’s more than just oil. It’s liquid engineering that provides extra protection against diesel engine problems, like soot and harsh deposits, that your engines faces every day.
Why is this important? Because soot and harsh deposits can make your oil thicker, block oil ways, cause wear and decrease performance.
Help extend the life of your engine with Castrol GTX Diesel.
Application
Castrol GTX Diesel 15W-40 is suitable for use in automotive diesel engines where the manufacturer recommends an API CI-4 or earlier specification 15W-40 lubricant.
It may also be used in gasoline engines where the manufacturer recommends an API SL or earlier specification 15W-40 lubricant.
Advantages
Castrol GTX Diesel provides :
Download Product Data Sheet Here
Castrol Agri Trans Plus 80W
Agri Trans Plus 80W can be used in hydraulic, transmission and PTO of tractors and off-highway equipment. It gives highest levels of wear prevention from start up and throughout the operative period with enhanced corrosion protection properties.
Advantages
CASTROL RADICOOL SF
Castrol Radicool SF is a long-life coolant based on monoethyleneglycol with advanced organic acid inhibitor technology.
In contrast to traditional antifreeze coolants, Castrol Radicool SF does not contain amines, nitrites, phosphates, silicates or other inorganic inhibitors.
Castrol Radicool SF works over a wide operating temperature range for effective engine cooling in all climates.
Castrol Radicool SF should be used at concentrations of between 33% and 50% dilution with purified water to give optimum corrosion protection and freezing protection between -18°C and -36°C.
Application
Castrol Radicool SF has been designed for use in engines employing cast iron, aluminium, copper or combinations of these metals used in modern engine designs. Castrol Radicool SF provides excellent protection to light metal engines.
Compatible with standard rubber hoses, gaskets and seals used within the cooling system.
It is suitable for a wide range of vehicles including cars, trucks and buses using both petrol and diesel engines. It is therefore particularly suitable for use in mixed fleets.
In the majority of cases, coolants are not compatible and should not be mixed with other coolants unless directed by the equipment manufacturer. If using Castrol Radicool SF for the first time, ensure that the cooling system has been adequately flushed with clean water.
Advantages
The special inhibitor package used in Castrol Radicool SF:
Download Product Data Sheet Here
Castrol Radicool NF Premix
Castrol Radicool NF premix is a ready to use antifreeze coolant formulated using monoethylene glycol and selected additives, free from nitrite, amine and phosphate inhibitors. It uses hybrid technology for the modern performance engines of cars and trucks. This product requires no customer dilution therefore ensures the correct concentration is always used. Castrol Radicool NF Premix provides year round protection against corrosion, and offers freezing protection down to -35 deg C.
Download Product Data Sheet Here
CASTROL AXLE EPX 80W-90
Axle EPX 80W-90 is a multipurpose axle oil which may be used in differentials, final drives and other applications in passenger cars and commercial vehicles where API GL-5 performance is required. It is approved by MAN and ZF for use in a range of commercial applications including axles in off-road and agricultural equipment.
Advantages
CASTROL AXLE EPX 85W-140
Axle EPX 85W-140 is a multipurpose axle oil which may be used in differentials, final drives and other applications in passenger cars and commercial vehicles where API GL-5 performance is required. It is approved by ZF for use in a range of commercial applications including axles in off-road and agricultural equipment.
Advantages
CASTROL AXLE EPX 90
Castrol Axle EPX 90 is an SAE 90 mineral based multipurpose axle oil which may be used in differentials, final drives and other applications in passenger cars and commercial vehicles where API GL-5 performance is required. Axle EPX 90 is approved by MB, MAN and ZF for use in a wide range of commercial applications.
Advantages
Download Product Data Sheet Here
CASTROL SYNTRANS Z LONG LIFE 75W-80
Castrol Syntrans Z Long Life 75W-80 is a full synthetic SAE 75W-80 fluid developed specifically to meet ZF extended drain intervals requirements (540.000 km) and is approved for use in all ZF commercial manual and automated manual transmissions. It can be recommended in other manual transmissions requiring API GL-4 and is particularly suitable for severe applications where loads and temperatures are higher.
Advantages
Download Product Data Sheet Here
CASTROL MS GREASE
Castrol MS Grease is an NLGI No. 2 lithium soap grease containing a proportion of Molybdenum Disulphide (MoS2) to offer lubrication even when the grease is forced out of the bearing. Castrol MS Grease is suitable for shock loaded bearings where the solid lubricant provides more anti-wear protection than a normal grease. Suitable for CV joints, universal joints and so on. Suitable for use at operating temperatures between -30ºC and 130ºC.
[pdf-embedder url=”http://store.lsg-gh.com/wp-content/uploads/2020/08/GRE-0029.pdf”]
CASTROL WB GREASE
Castrol WB Grease is a high quality, NLGI Grade 3 lubricating grease based on an optimised combination of lithium thickener, high viscosity mineral oil and polymer technology.
Application
The combination of high viscosity base oils, polymer and lithium thickener technology make Castrol WB Grease suitable for use in a wide variety of components including rolling element bearings and chassis points where operating conditions involve slow speeds and the requirement for a grease offering good film strength and adhesive qualities.
Castrol WB Grease is particularly suitable for use in wheel bearings and slow speed rolling element bearings found on heavy duty mining and construction equipment where peak temperatures do not exceed 120°C.
Advantages
Download Product Data Sheet Here
CASTROL POWER 1 RACING 4T 10W-50
Castrol POWER1 Racing 4T is fully synthetic engine oil for modern, high performance 4-stroke sports bike that increases engine acceleration and power right up to maximum.
Castrol POWER1 Racing 4T using “Race Derived Technology” based on Castrol’s long and successful racing association, flows fast and stays strong, reducing internal engine friction even under the most arduous riding conditions. It has been tested and proven to deliver exceptional acceleration and power at the touch of the throttle.
The added Castrol advantage of Trizone Technology™ ensures uncompromised performance protection, its ultimate performance for extreme riding.
Application
Castrol POWER1 Racing 4T is designed for high performance 4-stroke sports bikes to deliver optimum power and protection in all riding conditions.
It is suitable for all makes of 4-strokes bikes, both carburettor and fuel injected where API SL (and below) and JASO MA or MA2 specifications are recommended.
Advantages
CASTROL 2T
Castrol 2T is a modern, mineral based 2-stroke oil designed to give good all round performance in most 2-stroke motorcycles and other small engine applications. It’s low ash formula will help to protect against pre-ignition and provide good engine lubrication and cleanliness to maintain good compression and reliable engine startability throughout its life.
Application
Castrol 2T is suitable for use in most 2-stroke motorcycle and scooter engines which require good quality mineral engine oil. It is designed for both oil injection and pre-mix lubrication, as per manufacturers’ instructions, up to a fuel/oil ratio of 50:1.
CASTROL ACTEVO 4T 10W-40
Castrol Actevo 4T 10W-40 is a latest generation, part-synthetic engine oil developed specifically for 4-stroke motorcycle engines. It is uniquely formulated with Active Protection Molecules (APM), which provide a continuous layer of protection, ensuring up to 70% wear reduction when compared to a JASO MA-2 motorcycle oil, tested in a standard ASTM wear test.
Castrol Actevo 4T 10W-40 is uniquely formulated with Trizone Technology™ – Trizone testing uses Castrol’s own engine test methods to prove performance in the engine (good detergency and durability), reduced clutch slip and reduced gear pitting.
Castrol Actevo 4T 10W-40 has been tested over the equivalent of 600,000 km to ensure outstanding protection for motorcycles and scooters.
Application
Castrol Actevo 4T 10W-40 is suitable for four-stroke motorcycle engines where API SJ and JASO MA2 specifications are recommended.
Advantages
CASTROL POWER 1 RACING 2T
Castrol Power1 Racing 2T is advanced, fully synthetic 2-stroke engine oil for use in high speed, high performance 2-stroke Motorcycle engines to deliver ultimate performance.
Castrol Power1 Racing 2T with Race Derived Technology is designed to release the full potential from highly tuned motorcycle engines as it burns fast and protects well. It enhances throttle response for faster acceleration.
Application
Castrol Power 1 Racing is suitable for all modern, high performance 2-stroke motorcycle engines from European and Japanese manufacturers. It is designed for both oil injection and pre-mix lubrication, as per manufacturers’ instructions, up to a fuel/oil ratio of 50:1.
Advantages
Download Product Data Sheet Here
CASTROL CHAIN SPRAY (AERO)
Castrol Chain Spray O-R is a white, fully synthetic chain lubricant for motorcycle chains with O and X rings.
Application
To maximise the performance of Castrol Chain Spray O-R, clean the chain with Castrol Chain Cleaner before gently applying the chain spray. Once the lubricant has been applied, wait, depending on the outside temperature for 10-20 minutes, to let solvent evaporate before using the motorcycle.
Advantages
Castrol Chain Spray O-R provides:-
Download Product Data Sheet Here
CASTROL DWF AEROSOL
Castrol DWF Aerosol is high quality penetrating and de-watering fluid designed for use by the motorist and in the home or workshop.
Available in aerosol packs this fluid displaces moisture, cleans, protects and lubricates all metals.
Application
The superior creep characteristics of Castrol DWF Aerosol ensures effective penetration of corroded parts to allow for easy extraction, ideal for use on automotive exhaust systems, wheel nuts and suspension units.
When the fluid is used on damp engines it leaves a water-repellent film on the distributor, plugs, coil, ignition, H.T. leads and battery terminals. The extension tube may be used to introduce the lubricant into locks, cables, hinges, linkages and other items which are sometimes difficult to reach. These can be lubricated with ease.
In the home and office Castrol DWF Aerosol is a convenient lubricant for castors, typewriters, clocks, fans and door hinges. The pack is supplied with an extension tube for pin-point lubrication.
Download Product Data Sheet Here
CASTROL TRANSMAX OFFROAD 50
Castrol Transmax Offroad 50 is a transmission lubricant using highly refined mineral oil, designed for use in powershift transmissions, direct drive transmissions, wet disc brakes, final drives and differentials in off road machinery where Caterpillar TO-4 is required. Selected grades are approved for use in Allison C4 applications and Komatsu off road machinery drivetrain and hydraulics.
Advantages
CASTROL TRANSMAX OFFROAD 30
Castrol Transmax Offroad 30 is a transmission lubricant using highly refined mineral oil, designed for use in powershift transmissions, direct drive transmissions, wet disc brakes, final drives and differentials in off road machinery where Caterpillar TO-4 is required. Selected grades are approved for use in Allison C4 applications and Komatsu off road machinery drivetrain and hydraulics.
Advantages
Download Product Data Sheet Here
Castrol Tection Monograde 10W
Castrol Tection Monograde is a diesel engine oil available in SAE 10W, 20W, 30, 40 & 50 viscosities.
Application
The primary application of Castrol Tection Monograde 10W is in diesel engines, hydraulic systems and transmissions that specify the use of a monograde diesel engine oil.
Advantages
Castrol Tection Monograde 10W provides excellent protection in applications where a monograde diesel engine oil is required.
User benefits include
Download Product Data Sheet Here
CASTROL TECTION 15W-40
Castrol Tection is a 15W-40 mixed fleet diesel engine oil designed to provide excellent protection for fleets containing vehicles from a variety of manufacturers.
Application
The primary application for Castrol Tection 15W-40 is in Euro 3, and earlier, European technology vehicles and in US technology vehicles. Castrol Tection 15W-40 is a versatile product which can be used in trucks, buses, LCVs, off-road vehicles and equipment, and also in agricultural vehicles.
Advantages
Castrol Tection 15W-40 provides excellent protection for a wide variety of engine makes, so is an excellent choice for on and off-road fleets which contain different vehicle types.
User benefits include:
Download Product Data Sheet Here
ORIGINAL PRODUCTS
100% counterfeit protection
FREE SHIPPING
Purchases over 100litres attracts free delivery
EVERYTHING YOU NEED
Full range of Castrol products
Address
- Plot 119, Spintex Rd Opposite Johnson Wax P.O. Box A109, Accra-Ghana
- Digital Address: GT-335-7432
- Got Questions ? Call us
- +233 302817878
- +233 552557208
LSG Profile
- About us
- Our Mission
- Our vision
- Core value
- The team
- Our customers
- Support account application
Products
- Automotives
- Industrials
- Energy
- Marine
- Aviation
- Other products
Policies
- Export
- Cookies
- Privacy
- Refunds, return & cancellations
- Quality policy
- Quality certificate
Copyright © 2023 Lubricants Supplies Ghana Ltd. All rights reserved